Taiwan Semiconductor

5000

High-speed switching diode. Tape and Reel, along with the service of cutting strips (CT)

EPSON

10000+

A 24MHz base frequency passive crystal resonator. Its function is to work in conjunction with an external oscillation circuit to provide a precise and stable clock reference signal for chips such as microcontrollers (MCUs) and processors.

Toshiba

2000

TR The eight-channel NPN Darlington transistor array driver chip. Its core function is to act as an interface, amplifying the low-voltage, low-current control signals output by microcontrollers and other devices into switch signals that can directly drive high-voltage and high-current loads.

WEDC

50

This is a Synchronous Dynamic Random Access Memory (SDRAM). Its core function is to serve as a high-speed, high-capacity volatile data buffer, providing the main memory space required for program execution and data exchange by the processor (CPU/SoC), making it a core component of computing systems.

ON Semiconductor

2000

This is an AEC-Q100 qualified, 12V, 6A synchronous buck regulator module. Its core function is to efficiently and stably convert a higher DC input voltage into a lower DC output voltage, providing up to 6A of continuous current for automotive electronic control units. It is commonly used in scenarios requiring clean and efficient power, such as infotainment systems and Advanced Driver-Assistance Systems.

Integrated Device Technology, Inc.

1000

This is a high-performance, low-jitter clock generator/fanout buffer. Its core function is to receive a differential or single-ended input clock signal, process it through an internal Phase-Locked Loop, and generate multiple (typically 8) ultra-low-jitter, high-precision differential clock outputs for synchronizing multiple high-performance processors, FPGAs, or ASICs.

TE Connectivity

800

This is a 6kV Gas Discharge Tube. Its core function is surge and overvoltage protection. When a transient overvoltage on the line (such as induced lightning or switching surges) reaches its DC breakdown voltage, the gas inside the tube rapidly ionizes and conducts, shunting the massive transient energy to ground, thereby protecting downstream electronic equipment.

Toshiba

2000

This is an N-channel Junction Field-Effect Transistor. Its core function is to amplify weak voltage signals with high fidelity by leveraging its high input impedance and extremely low noise characteristics. It is particularly suitable as a pre-amplifier input stage in various low-level analog signal chains.

Infineon Technologies AG

1000

This is an N-channel enhancement-mode small-signal MOSFET from Infineon. Its core function is to act as a voltage-controlled electronic switch or amplifier, using the gate voltage to control the current flow between the source and drain.

Zilog

800

This is an 8-bit microprocessor developed by Zilog, Inc. based on the Z80 architecture. It is the CMOS version of the classic Z80 CPU. Its core function is to serve as the central processing unit of the system, executing program instructions, performing arithmetic and logical operations, controlling data flow, and managing memory and peripheral devices.

Diodes Incorporated

10000

ZXTN04120HFFTA is a Darlington transistor produced by Diodes Incorporated. It is mainly used for circuit protection, to suppress electrostatic discharge (ESD) and electrical overstress (EOS).

ST

1000

The 1.5KE33CA is a transient voltage suppression diode (TVS) produced by STMicroelectronics, mainly used for circuit protection to suppress electrostatic discharge (ESD) and electrical over-stress (EOS).

INTEL

200

SRH8Q is the internal code name of the Intel Core i7-10750H processor, which is a 10th-generation mobile CPU. It is manufactured using a 14-nanometer process, featuring 6 cores and 12 threads. The base frequency is 2.6 GHz, with a maximum turbo frequency of 5.0 GHz and a TDP power consumption of 45W. In terms of performance, it can still handle mainstream office and gaming demands and is suitable for users seeking a good balance of performance and cost.

Skyworks Solutions Inc.

1000

This is a broadband, low-noise amplifier. Its core function is to receive weak RF signals and provide high-gain, low-noise amplification while maintaining good linearity, thereby improving the sensitivity and dynamic range of the receiver. It is primarily used in the front-end of RF receive chains.

Murata Manufacturing Co., Ltd.

1000

This is a multilayer ceramic chip bandpass filter. Its core function is to selectively allow signals within a specific frequency range (passband) to pass through, while strongly attenuating frequency components outside that range (stopband). It is used in RF front-end circuits to suppress interference and improve signal purity.

Melexis

1000

This is a high-precision, digitally output pressure sensor module. Its core function is to convert barometric or hydrostatic pressure signals into high-precision digital signals, and output them through digital interfaces such as I²C or SPI, used for accurate pressure measurement and depth/altitude calculation.