AMD

100

High-performance mobile version processor (CPU). It is the computing and control core of laptops or mini computers, responsible for running the operating system and all applications.

Toshiba

5000

Dual Retriggerable Monostable Multivibrator. Its core function is to generate an adjustable-width precise pulse at its output pin when a trigger signal (rising edge or falling edge) is received. It is commonly used in circuits for timing, delay, and pulse shaping.

Molex

1000

8-pin double row plug housing. As a connector socket, it is used to accommodate male crimp terminals and mate with the corresponding female housing of the Mini-Fit Jr. series (such as 39-01-2080) to achieve high-current power connections for wire-to-wire or wire-to-board applications.

Littelfuse

10000+

Self-restoring fuse (PPTC). It is used to protect the circuit from damage caused by excessive current. When a circuit overcurrent fault occurs, it will rapidly switch from a low-resistance state to an extremely high-resistance state, thereby limiting the current; after the fault is eliminated and the power is cut off, it can automatically reset and return to the low-resistance state, achieving maintenance-free circuit protection.

JST

6000

Single-row, 5-pin, right-angle type pin socket (male head). Used to connect wires (via the pressing-in of the female head housing) to a printed circuit board (PCB), enabling the transmission and connection of signals or power.

Littelfuse

1000

Bidirectional ESD static discharge suppressor / TVS diode. It is used to protect sensitive electronic equipment from damage caused by static discharge (ESD), and can quickly absorb and clamp transient high-voltage pulses.

NXP

5000

A universal LCD driver suitable for low reuse rate. It can drive static or multiplexed LCDs with up to 4 backplanes and 40 segments. It can be directly connected to a microcontroller and communicate via I²C bus to generate the driving signals required by the LCD.

Omron Automation and Safety

78000

DIN rail mountable switching power supply. It efficiently and stably converts 85-264V AC to 24V DC, providing a stable and reliable power source for industrial control systems, automation equipment, etc.

onsemi

78000

NPN small-signal bipolar transistor (BJT). It is used for general amplification and medium-speed switching applications, such as signal amplification, logic level conversion, driving small loads, etc.

ams-OSRAM AG

8000

940nm/950nm infrared light-emitting diode (IRED). It efficiently converts electrical energy into light output within the near-infrared spectrum, and is mainly used in applications such as infrared lighting, sensing, and data transmission.

SGMICRO

50000

42V/1.2A, 1.2MHz synchronous step-down converter. It efficiently and stably converts a wide input voltage range of 4.5V to 42V into a variable low voltage output (minimum 0.83V), which is particularly suitable for industrial power supplies and battery-powered systems.

STMicroelectronics

10000

600W bidirectional transient voltage suppression diode (TVS). When a momentary high-voltage surge occurs in the circuit, it responds at a picosecond speed, clamping the voltage within a safe range, thereby protecting subsequent sensitive circuits from damage.

TAIYO YUDEN

2000

Surface mount multilayer ceramic capacitors (MLCCs) are used for energy storage, filtering and decoupling in circuits. This series is mainly targeted at consumer electronic products such as mobile phones and portable devices.

TAIYO YUDEN

2000

Surface mount multilayer ceramic capacitors (MLCCs) are used for energy storage, filtering and decoupling in circuits. This series is mainly targeted at consumer electronic products such as mobile phones and portable devices.

Texas Instruments

5000

Single-channel 2-input XOR Gate (XOR Gate). It performs the logical function Y = A ⊕ B. When the two inputs are different, the output is a high level; when they are the same, the output is a low level.

Bourns Inc.

1000

Common mode choke/filter. It is used to suppress common-mode electromagnetic interference (EMI) in electronic circuits, by attenuating common-mode noise to ensure signal integrity.